TM 1-1520-238-23
Change 2
2-347
2.95.
RIGHT AFT SIDE TRANSMISSION ROTOR SUPPORT STRUT ASSEMBLY
REMOVAL/INSTALLATION – continued
2.95.3. Removal
a. Remove two loop clamps (1) from right aft
side transmission rotor support strut assem-
bly (2).
(1) Hold two screws (3). Remove nuts (4).
(2) Remove two screws (3) and washers (5) from
clamps (1) and (6).
(3) Remove two clamps (1) from strut (2).
WARNING
Apply tension to the maintenance
crane cable/lifting hook before remov-
ing strut. Failure to follow instructions
may result in serious injury or death to
maintenance personnel and/or seri-
ous damage to the helicopter. If injury
occurs, seek medical aid.
b. Remove strut (2) from rotor support mast sup-
port base (7) and right forward side transmis-
sion rotor support strut assembly (8).
(1) Remove and discard cotter pin (9).
(2) Hold bolt (10). Break torque on nut (11). Use
telescopic bar and adapter.
(3) Remove washer (12) and nut (11). Use
ratchet and 5-inch extension.
(4) Remove washer (13) and bolt (10) from strut
(2), base (7), and strut (8).
c. Remove strut (2) from aft center strut (14).
(1) Hold two adjustable fit bolts (15). Remove
two self-locking nuts (16) and washers (17).
(2) Remove two bolts (15) from struts (2) and
(14).
2.95.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
GO TO NEXT PAGE
4
4
M04-1474-8
1
6
5
3
6
5
1
3
2
7
9
2
11
M04-1474-4
13
10
8
12
2
M04-1474-2
17
16
15
14
