TM 1-1520-238-23
2-360
Change 5
2.98.
ELECTRONIC COMPARTMENT SUPPORT ASSEMBLY (HARS)
REMOVAL/INSTALLATION – continued
11
12
2
14
4
15
M04-3633-3
7
13
4
1
(8) Remove support (1) and shim(s) (11) from shelf (2).
(9) If installed, remove washers (12) from shelf (2).
(10) Remove two screws (13) and washers (4) from panel (7).
(11) Remove panel (7) from shelf (2).
(12) Remove four screws (14) and washers (4) from panel (15).
(13) Remove panel (15) from shelf (2).
2.98.4. Cleaning
a. Clean sealing compound residue from shelf and support (para 1.47).
b. Access and vacuum all FOD through access holes in shelf (1). Use vacuum cleaner.
2.98.5. Inspection
a. Check fuselage for cracks and corrosion (para 1.49).
b. Check support for cracks and corrosion (para 1.49).
c. Check support alinement pins for damage. Go to paragraph 2.98.6 to replace defective pin.
d. Check support and aft electronics bay floor for corrosion (para 1.49).
GO TO NEXT PAGE
