TM 1-1520-238-23
2-418
2.114.
HORIZONTAL STABILATOR ACTUATOR FITTING REMOVAL/INSTALLATION – continued
(6) Stake
bearing
(5)
into
fitting
(1)
(TM 55-1500-322-24). Use staking tool kit
and arbor press.
(7) Touch up paint (TM 55-1500-345-23). Use
epoxy primer coating kit (item 78, App F) and
polyurethane coating (item 141, App F).
2.114.7. Installation
a. Install fitting (1) on stabilator (2). Torque four
bolts (3) to 15 INCH-POUNDS.
(1) Install four bolts (3) and washers (4) in fitting
(1).
(2) Torque four bolts (3) to 15 INCH-POUNDS.
Use torque wrench.
(3) Lockwire four bolts (3) to fitting (1). Use wire
(item 223, App F).
(4) Apply torque stripes to four bolts (3). Use
sealing compound (item 175, App F).
b. Inspect (QA).
c. Install horizontal stabilator actuator (para
2.113).
END OF TASK
M04-4176-4
1
5
M04-4176-5
3
4
1
4
3
2
