TM 1-1520-238-23
Change 3
2-415
2.114.
HORIZONTAL STABILATOR ACTUATOR FITTING REMOVAL/INSTALLATION
2.114.1. Description
This task covers:
Removal. Cleaning. Inspection. Repair. Installation.
2.114.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Universal puller kit (item 243, App H)
Hand operated arbor press (item 234, App H)
Adjustable air filtering respirator (item 262, App H)
Staking tool kit (item 392, App H)
0 - 30 inch-pound 1/4-inch drive dial indicator torque
wrench (item 445, App H)
Materials/Parts:
Bearing
Brush (item 34, App F)
Cloth (item 52, App F)
Epoxy primer coating kit (item 78, App F)
Methyl ethyl ketone (item 124, App F)
Polyurethane coating (item 141, App F)
Primer (item 145, App F)
Primer coating (item 147, App F)
Sealing compound (item 175, App F)
Wire (item 223, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 55-1500-322-24
TM 55-1500-345-23
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.113
Horizontal stabilator actuator removed
GO TO NEXT PAGE
M04-4176-1
