TM 1-1520-238-23
2-416
2.114.
HORIZONTAL STABILATOR ACTUATOR FITTING REMOVAL/INSTALLATION continued
2.114.3. Removal
a. Remove horizontal stabilator actuator fitting
(1) from stabilator (2).
(1) Remove lockwire from four shear bolts (3).
(2) Remove four bolts (3) and washers (4) from
fitting (1).
(3) Remove fitting (1) from stabilator (2).
2.114.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
2.114.5. Inspection
a. Check fitting for cracks and corrosion (para
2.102).
b. Check bearing staking area for cracks and
damage. None allowed.
c. Check bearing for binding, catching, corro-
sion, metal chips, and other contamination.
None allowed.
GO TO NEXT PAGE
M04-4176-2
3
4
1
4
3
2