TM 1-1520-238-23
2-687
2.193.
WIRE STRIKE PROTECTION AIRCRAFT CABLE CUTTER REMOVAL/INSTALLATION
(AVIM) – continued
2.193.6. Installation
NOTE
Quantities of mounting hardware may
vary, depending on cutter assembly.
a. Install cutter (2) on fitting (8).
(1) Apply a thin coat of sealing compound to mat-
ing surfaces of cutter (2) and fitting (8). Use
sealing compound (item 177, App F) and
brush (item 34, App F).
(2) Position cutter (2) with fitting (8) mounting
holes.
(3) Install 6 bolts (11), 12 washers (10), and 6
nuts (9) on cutter (2) and fitting (8).
(4) Apply a thin coat of sealing compound to
edges of cutter (2) and fitting (8). Use sealing
compound (item 177, App F) and brush
(item 34, App F).
b. If required, install strut (1) on cutter (2).
(1) Position support (1) with cutter (2) mounting
holes.
(2) Install bolt (6) and washers (7) through strut
(1).
(3) Install bolt (5), two washers (4), and nut (3) on
strut (1).
c. Inspect (QA).
END OF TASK
M04-3543-2
8
10
11
2
10
9
M04-3543-3
7
2
6
1
34
5
4
