TM 1-1520-238-23
2-692
2.195.
WIRE STRIKE PROTECTION AIRCRAFT CABLE CUTTER BLADES REPLACEMENT
2.195.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
2.195.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
L-style socket head key set (item 187, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Brush (item 34, App F)
Sealing compound (item 177, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
NOTE
This task is typical for all fuselage
mounted cutter blades.
2.195.3. Removal
a. Remove cutter blades (1) and (2).
(1) Remove 8 screws (3), nuts (4), and 16 wash-
ers (5). Use socket head key set.
(2) Slide upper blade (1) out from between two
check plates (6). Discard blade (1).
(3) Slide lower blade (2) out from between two
plates (6). Discard blade (2).
(4) If installed, remove shims (7) from between
two plates (6).
2.195.4. Cleaning
a. Clean sealing compound residue (para 1.47).
2.195.5. Inspection
a. Check mounting surfaces for cracks and cor-
rosion (para 2.11).
GO TO NEXT PAGE
M04-3541-5
1
2
4
5
6
3
5
M04-3541-1
