TM 1-1520-238-23
2-690
Change 4
2.194.
GUN WIRE STRIKE PROTECTION CUTTER AND DEFLECTOR
REMOVAL/INSTALLATION – continued
(4) Remove self-locking nut (20), two washers
(21), shim (21.1) (if installed), and shear bolt
(22).
(5) Remove self-locking nut (23), two washers
(24), and shear bolt (25).
2.194.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
2.194.5. Inspection
a. Check mounting surfaces for cracks. None al-
lowed.
b. Check mounting surface for corrosion (para
1.49).
(1) Replace deflector if corrosion exceeds 0.025
INCH.
c. Check deflector for damage.
(1) Replace deflector if nicks, scratches, and
dents exceed a depth of 0.050 INCH.
2.194.6. Installation
NOTE
Shims must be installed, if previously re-
moved.
a. Install deflector (7) on cradle (8).
(1) Aline deflector (7) with cradle (8) mounting
holes.
(2) Install bolt (14), two washers (13), and nut
(12) on deflector (7) and cradle (8).
(3) Install bolt (18), washer (19), and shim (19.1)
(if required) in cradle (8).
(4) Install bolt (17), two washers (16), and nut
(15) in deflector (7) and cradle (8).
GO TO NEXT PAGE
M04-3537-4A
24
23
25
22
21
20
21.1
21
M04-3537-5A
9
17
16
8
15
16
13
13
14
8
12
19
18
8
19.1
