TM 1-1520-238-23
Change 4
2-691
2.194.
GUN WIRE STRIKE PROTECTION CUTTER AND DEFLECTOR
REMOVAL/INSTALLATION – continued
(5) Install bolt (22), two washers (21), shim
(21.1), (if required) and nut (20) in deflector
(7) and cradle (8).
(6) Install bolt (25), two washers (24), and nut
(23) in deflector (7) and cradle (8).
b. Install bracket (2) and cutter (1).
(1) Aline bracket (2) with cradle (8) mounting
holes.
(2) Install two bolts (5), four washers (4), two
nuts (3), and two shims (6) (if required) in
deflector (7) and angle bracket (2).
(3) Aline cutter (1) with bracket (2) mounting
holes.
(4) Install six bolts (11), 12 washers (10), and six
nuts (9) in bracket (2) and deflector (7).
c. Inspect (QA).
END OF TASK
22
21
20
M04-3537-6A
9
24
23
25
21.1
21
M04-3537-7A
11
10
1
24
3
7
10
9
68
4
5
6
