TM 1-1520-238-23
Change 4
2-689
2.194.
GUN WIRE STRIKE PROTECTION CUTTER AND DEFLECTOR
REMOVAL/INSTALLATION – continued
2.194.3. Removal
NOTE
Retain shims for installation (if installed).
a. Remove aircraft cable cutter (1) and angle
bracket (2).
(1) Remove two self-locking nuts (3), four wash-
ers (4), and two shear bolts (5) from bracket
(2).
(2) Remove two shims (6) (if installed), from be-
tween deflector (7) and angle bracket (2).
(3) Remove six self-locking nuts (9), 12 washers
(10), and six shear bolts (11) from cutter (1).
(4) Remove cutter (1) and bracket (2) off deflec-
tor (7).
b. Remove deflector (7) from cradle (8).
(1) Remove self-locking nut (12), two washers
(13), and bolt (14).
(2) Remove self-locking nut (15), two washers
(16), and shear bolt (17).
(3) Remove shear bolt (18), washer (19), and
shim (19.1) (if installed) from cradle (8).
GO TO NEXT PAGE
M04-3537-2B
11
10
1
24
3
7
10
9
6
8
4
5
M04-3537-3A
8
17
16
8
15
16
13
13
14
8
12
7
19
18
8
19.1
