TM 1-1520-238-23
2-695
2.196.
TAILBOOM UTILITY HYDRAULIC TUBES ARMOR CHANNEL ASSEMBLIES
REMOVAL/INSTALLATION continued
NOTE
Some channel stack-ups will have a
washer or shim between the grommet
and airframe.
b. Remove channel (3) from airframe (11).
(1) Remove screws (12), shims (13), and grom-
mets (14) from airframe (11).
(2) Remove screw (15) and washer (16) from
channel (3) and armor plate (17) (if required).
(3) Remove channel (3).
2.196.4. Cleaning
a. Clean sealing compound from removed and
attaching parts (para 1.47).
b. Wipe removed and attaching parts with a
clean rag.
2.196.5. Inspection
a. Check grommets for cracks and damage. Re-
place defective grommets.
b. Check channel for cracks and damage. None
allowed.
c. Check channel nutplates for loose rivets and
stripped
or
damaged
threads
(TM 1-1500-204-23).
d. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
3
13
14
16
15
M04-4668-3
12
17
11