TM 1-1520-238-23
3-54
Change 3
3.16.
MAIN LANDING GEAR TRAILING ARM ASSEMBLY REMOVAL/INSTALLATION – continued
c. Aline bracket (18) with center of trailing arm
(3) and secure. Torque two bolts (22) to 20 INCH-
POUNDS.
(1) Aline face of bracket (18) with center of trail-
ing arm (3). Use combination square.
(2) Torque two bolts (22) to 20 INCH-POUNDS.
Use torque wrench.
(3) Check alinement (para 9.149).
d. Inspect (QA).
e. Clean trailing arm (3) (para 1.47).
f. Clean threads on cross tube (9). Use
lubricating oil (item 119, App F) and brush
(item 34, App F) to remove dry film lubricant (para
1.47).
g. Check threads on cross tube (9) for burrs at
safety stud holes (31).
h. Check for cracks on cross tube (9). None al-
lowed.
i. Install spacer ring (17) on cross tube (9). Small
side should face inboard.
j. Inspect (QA).
GO TO NEXT PAGE
M04-055-17
3
18
22
LEFT SIDE
M04-055-18
9
17
31
