TM 1-1520-238-23
Change 3
3-59
3.17
MAIN LANDING GEAR SQUAT SWITCH TARGET AND BRACKET
DISASSEMBLY/ASSEMBLY – continued
3.17.4. Assembly
a. Install target (8) in bracket assembly (2).
(1) Install nut (10) on target (8).
(2) Position target (8) on bracket assembly (2).
(3) Hold target (8). Install nut (10).
b. Install bracket (1) on bracket assembly (2).
Torque two nuts (4) to 60 INCH-POUNDS.
(1) Install two bolts (3) and washers (7).
(2) Hold two bolts (3). Install bracket (1), washers
(6), washers (5), and nuts (4).
(3) Torque two nuts (4) to 60 INCH-POUNDS.
Use torque wrench.
c. Inspect (QA).
d. Install main landing gear trailing arm and
squat switch target bracket assembly (para
3.16).
NOTE
Leave helicopter on jacks until squat
switch target adjustments are made
(para 9.149).
e. Install main landing gear shock strut (para
3.18).
f. Adjust squat switch target plate (para 9.149).
g. Lockwire nuts (9) and (10) to bracket assem-
bly (2). Use wire (item 226, App F).
h. Remove tripod jacks (para 1.66).
i. Secure access door L115 (para 2.2).
j. Inspect (QA).
END OF TASK
M04-2285-9
2
1
8
10
3
7
6
8
9
4
5
M04-2285-10A
2
10
9
VIEW ROTATED
