TM 1-1520-238-23
4-492
4.149.
NO. 1 OR NO. 2 ENGINE LOAD DEMAND SPINDLE FORWARD CABLE REMOVAL – continued
k. Remove rod end (40) from bellcrank (41).
(1) Remove and discard cotter pin (42).
(2) Hold bolt (43). Remove nut (44).
(3) Remove bolt (43) from bellcrank (41) and rod
end (40).
l. Remove rod end (40) from cable (3) (No. 1
engine) or cable (10) (No. 2 engine).
(1) Hold rod end (40). Loosen nut (45).
(2) Remove rod end (40) and nut (45) from cable
(3) or (10).
m. Remove cable (3) (No. 1 engine) or cable (10)
(No. 2 engine) from cable support (46).
(1) Hold cable (3) or (10) at flats (47). Remove
nut (48) and spacer (49).
(2) Pull cable (3) or (10) outboard until free of
support (46).
(3) Remove spacer (50) and nut (51).
(4) Remove cable (3) or (10).
4.149.4. Cleaning
a. Clean rod end, cable support, and support
bracket (para 1.47).
4.149.5. Inspection
a. Check rod end for thread damage and bearing
surface scars. None allowed.
b. Check cable support and support bracket for
cracks. None allowed.
c. Check cable for kinks, dents, and chaffing.
None allowed.
d. Check rod end, cable support, and support
bracket for corrosion (para 1.49).
END OF TASK
M04-1187-15
42
44
41
40
10
43
43
3
40
42
44
4045
3
41
NO. 2 ENGINE LDS CABLE
NO. 1 ENGINE LDS CABLE
M04-1187-8
48
3
47
51
49
46
NO. 1 ENGINE LDS CABLE
50
M04-1187-16
4849
46
NO. 2 ENGINE LDS CABLE
10
51
50
47
