TM 1-1520-238-23
4-515
4.155.
ENGINE LOAD DEMAND SPINDLE BELLCRANK REPAIR (AVIM) – continued
4.155.5. Inspection
a. Check bellcrank bushing and bearing mount-
ing holes for corrosion (para 1.49).
b. Measure bushing mounting hole inner diame-
ter.
(1) If diameter exceeds 0.3778 INCH, replace
bellcrank.
c. Measure bearing mounting hole inner diame-
ter.
(1) If diameter exceeds 0.8744 INCH, replace
bellcrank.
4.155.6. Installation
a. Install
bearing
(3)
in
bellcrank
(2)
(TM 55-1500-322-24).
(1) Apply compound to bearing mounting hole
(4). Use sealing compound (item 166,
App F).
(2) Install bearing (3) in bellcrank (2). Use arbor
press and puller kit.
b. Install bushing (1) in bellcrank (2)
(TM 55-1500-322-24).
(1) Apply primer bushing mounting hole (5). Use
primer coating (item 147, App F).
(2) Install bushing (1) in bellcrank (2). Use arbor
press and puller kit.
c. Inspect (QA).
END OF TASK
M04-3933-2
1
3
2
4
5
