TM 1-1520-238-23
4-542
4.162.
PILOT POWER AVAILABLE SPINDLE BELLCRANKS REMOVAL/INSTALLATION – continued
NOTE
To remove No. 2 bellcrank, go to step h.
d. Remove bolt (1), spacer (2), and nut (3).
(1) Remove and discard cotter pin (4).
(2) Hold bolt (1). Remove nut (3).
(3) Remove bolt (1) and spacers (2).
e. Remove forward rod end (5) from No. 1 bell-
crank (6).
(1) Remove and discard cotter pin (7).
(2) Hold bolt (8). Remove nut (9).
(3) Remove bolt (8).
f. Remove aft rod end (10) from bellcrank (6).
(1) Remove and discard cotter pin (11).
(2) Hold bolt (12). Remove nut (13).
(3) Remove bolt (12).
g. Remove bellcrank (6).
GO TO NEXT PAGE
M04-3560-6
4
3
2
1
M04-3560-2
8
9
7
5
6
M04-3560-3
12
6
13
11
10
