TM 1-1520-238-23
4-544
4.162.
PILOT POWER AVAILABLE SPINDLE BELLCRANKS REMOVAL/INSTALLATION – continued
b. Install forward rod end (5) on bellcrank (6).
Torque nut (9) 14 to 18 INCH-POUNDS.
(1) Aline rod end (5) with bellcrank (6).
(2) Install bolt (8) through bellcrank (6) and rod
end (5).
(3) Install nut (9) on bolt (8).
(4) Hold bolt (8). Torque nut (9) to 14 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 18 INCH-POUNDS.
c. Install aft rod end (10) on bellcrank (6). Torque
nut (13) 14 to 18 INCH-POUNDS.
(1) Aline rod end (10) with bellcrank (6).
(2) Install bolt (12) through bellcrank (6) and rod
end (10).
(3) Install nut (13) on bolt (12).
(4) Hold bolt (12). Torque nut (13) to 14 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 18 INCH-POUNDS.
NOTE
For No. 1 bellcrank installation, go to step
g.
d. Perform self-retaining bolt fit check (para
11.1).
GO TO NEXT PAGE
M04-3560-8
8
6
5
9
M04-3560-9
6
13
10
12
