TM 1-1520-238-23
4-585
4.169.
CPG POWER QUADRANT DISASSEMBLY/ASSEMBLY (AVIM) – continued
d. Remove flat washer (38) and shims (39) from
power lever shaft (24).
(1) Remove fiber spacer (40) and left lever (41)
from power lever shaft (24).
(2) Remove fiber spacer (42), right lever (43),
and fiber spacer (44) from power lever shaft
(24).
NOTE
The following step is typical for right or
left power levers.
(3) Remove trigger release (35) from power lever
(45).
(a) Remove two screws (46) and upper re-
taining plate (47) from lever (45).
(b) Remove screw (48) and guide (49) from
lever (45).
(c) Remove bar (50) from lever (45).
(d) Remove two screws (51) from bar (50)
and trigger release (35).
GO TO NEXT PAGE
M04-3927-9
38
39
40
41
42
43
24
44
35
50
51
47
46
49
48
45
M04-3927-10
