TM 1-1520-238-23
4-586
4.169.
CPG POWER QUADRANT DISASSEMBLY/ASSEMBLY (AVIM) – continued
e. Remove left seal retainer (52) from quadrant
(2).
(1) Remove seven screws (53) from retainer (52)
and quadrant (2).
(2) Remove retainer (52), rubber seal (36), and
seal support (54).
f. Remove right seal retainer (55) from quadrant
(2).
(1) Remove seven screws (56) from retainer (55)
and quadrant (2).
(2) Remove retainer (55), rubber seal (37), and
seal support (57).
g. Remove light indicating panel connector (58)
from quadrant (2).
(1) Remove screw (59), washer (60), and wire
end (61) from connector (58).
(2) Remove nut (62) and washer (63) from con-
nector (58).
(3) Remove connector (58).
h. Remove wire harness (64) from connector J1
(65).
(1) Identify and depin wires (66) from connector
(65) (TM 55-1500-323-24).
i. Remove connector J1 (65) from quadrant (2).
(1) Remove connector backshell (67) from con-
nector (65).
(2) Remove four nuts (68) from screws (69).
(3) Remove four screws (69) and connector (65)
from quadrant (2).
GO TO NEXT PAGE
56
53
55
37
57
2
52
M04-3927-11
36
54
M04-3927-12
58
2
63
62
61
60
59
M04-3927-13
69
65
2
67
66
68
64
