TM 1-1520-238-23
Change 1
4-663
4.183.
NO. 2 ENGINE POWER AVAILABLE SPINDLE (PAS) RIGGING PROCEDURE – continued
ao. Verify power lever (6) is in IDLE position.
NOTE
If CPG power lever alines with IDLE posi-
tion, go to step aw.
ap. Remove cable rod end (38) from power lever
(6).
(1) Remove and discard cotter pin (39).
(2) Hold bolt (40). Remove nut (41).
(3) Remove bolt (40) from power lever (6) and
rod end (38).
GO TO NEXT PAGE
6
M04-1208-21
M04-1208-19A
CPG STATION
M04-1208-20
40
38
39
6
41
