TM 1-1520-238-23
4-730
4.198.
CPG POWER QUADRANT LEVER RELEASE SWITCH REMOVAL/INSTALLATION
(AVIM) continued
c. Remove lever release switch (7) from CPG
power quadrant (8).
(1) Remove wires of switch (7) from power lever
(16). Remove switch (7) and switch actuator
(15) from power quadrant (8).
(2) Remove two locknuts (9) lockwashers (10)
and washers (11).
(3) Remove two screws (12) from switch (7)
switch actuator (13) and stop bar (14).
(4) Remove lacing tape as required.
(5) Pull wires of switch (7) through power lever
(16).
(6) Remove switch (7).
4.198.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
4.198.5. Inspection
a. Check mounting surfaces and attaching parts
for cracks. None allowed.
b. Check wires for cuts, cracks, and damaged
connectors (TM 55-1500-323-24).
c. Check mounting surfaces and attaching parts
for corrosion (para 1.49).
GO TO NEXT PAGE
M04-3336-2
10
1114
13
7
12
8
9
15
9