TM 1-1520-238-23
8-61
8.23.
PILOT/CPG ENGINE INSTRUMENT DIM/TEST CONTROL PANEL DISASSEMBLY/ASSEMBLY
(AVIM) – continued
8.23.3. Disassembly
a. Remove cover (1) from case (2).
(1) Remove four screws (3).
(2) Remove cover (1).
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
NOTE
During disassembly of control panel,
identify wires and terminations for proper
placement during installation.
b. Remove resistor (4) from case (2).
(1) Identify and desolder three wires (5) from re-
sistor
(4).
Use
soldering
iron
(TM 55-1500-323-24).
(2) Remove nut (6) from resistor (4).
(3) Remove resistor (4).
c. Remove switch (7) from case (2).
(1) Identify and desolder three wires (8) from
switch
(7).
Use
soldering
iron
(TM 55-1500-323-24).
(2) Remove nut (9) from switch (7).
(3) Remove switch (7).
GO TO NEXT PAGE
M04-3544-1
3
1
2
2
6
4
5
M04-3544-2
2
9
7
M04-3544-3
8
