TM 1-1520-238-23
8-62
8.23.
PILOT/CPG ENGINE INSTRUMENT DIM/TEST CONTROL PANEL DISASSEMBLY/ASSEMBLY
(AVIM) – continued
NOTE
This step is typical for removal of all five
lampholders installed in case.
d. Remove lampholder (10) from case (2).
(1) Identify and desolder two wires (11) from lam-
pholder
(10).
Use
soldering
iron
(TM 55-1500-323-24).
(2) Remove lampholder (10).
(3) Remove lamp (12) and filter (13) from lam-
pholder (10).
e. Remove photoelectric cell (14) from case (2).
(1) Identify and desolder two wires (15) from
photoelectric cell (14). Use soldering iron
(TM 55-1500-323-24).
(2) Remove photoelectric cell (14) through front
of case (2).
(3) Remove spacer (16) from photoelectric cell
(14).
f. Remove connector (17) from case (2).
(1) Identify and desolder 10 wires (18) from con-
nector
(17).
Use
soldering
iron
(TM 55-1500-323-24).
(2) Hold screwlock (19).
(3) Remove nut (20) from screwlock (19).
(4) Remove screwlock (19) and connector (17)
from case (2).
8.23.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
GO TO NEXT PAGE
2
M04-3544-4
11
13
12
10
2
M04-3544-5
15
16
14
M04-3544-6
2
19
17
20
18
