TM 1-1520-238-23
8-64
8.23.
PILOT/CPG ENGINE INSTRUMENT DIM/TEST CONTROL PANEL DISASSEMBLY/ASSEMBLY
(AVIM) – continued
b. Install cell (14) in case (2).
(1) Install spacer (16) on cell (14).
(2) Apply a small amount of adhesive on outer
rim of spacer (16). Use adhesive (item 14,
App F).
(3) Press cell (14) through front side of case (2).
Clean excess sealant. Use cloth (item 52,
App F).
(4) Attach two identified wires (15) to cell (14).
Use soldering iron and solder (item 189,
App F) (TM 55-1500-323-24).
NOTE
This step is typical for installation of all
lampholders.
c. Install lampholder (10) in case (2).
(1) Attach two identified wires (11) to lampholder
(10). Use soldering iron and solder (item 189,
App F) (TM 55-1500-323-24).
(2) Install lamp (12) and filter (13) on lampholder
(10).
(3) Press lampholder (10) in case (2).
GO TO NEXT PAGE
2
M04-3544-8
15
16
14
2
M04-3544-9
11
13
12
10
