TM 1-1520-238-23
9-166
9.49.
CPG CIRCUIT BREAKER PANEL NO. 2 CIRCUIT BREAKER REPLACEMENT – continued
b. Remove circuit breaker (2) from CPG circuit
breaker panel No. 2 (5).
(1) Remove nut (6) and washer (7).
(2) Remove circuit breaker (2).
9.49.4. Cleaning
a. Wipe circuit breaker mounting area with a
clean rag.
9.49.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.1).
b. Check wires for wear, cuts, breaks, and dam-
aged terminal lugs (para 9.1).
c. Check removed and attaching parts for corro-
sion (para 1.49).
9.49.6. Installation
a. Install circuit breaker (2) on panel (5).
(1) Install circuit breaker (2) so that tab (8) seats
in locator hole (9).
(2) Install washer (7) and nut (6).
b. Attach identified wires (1) to circuit breaker
(2).
(1) Install screws (3) through washers (4) and
wires (1).
c. Inspect (QA).
d. Install CPG circuit breaker panel No. 2 light
indicating panel (para 9.48).
e. Install CPG circuit breaker panel No. 2 (para
9.47).
f. Refer to circuit breaker reference list to per-
form appropriate maintenance operational
check (TM 1-1520-238-T).
END OF TASK
M04-1372-3
2
7
6
5
M04-1372-4
2
8
9
7
6
5
M04-1372-5
1
3
4
2
