TM 1-1520-238-23
9-169
9.50.
GROUND SERVICE UTILITY RECEPTACLE REMOVAL/INSTALLATION continued
9.50.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
9.50.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.1).
b. Check wires for wear, cuts, breaks, and dam-
aged connections (para 9.1).
c. Check removed and attaching parts for corro-
sion (para 1.49).
9.50.6. Installation
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
a. Solder wires (9) to receptacle (1).
(1) Route wires (9) through backshell (6).
(2) Solder identified wires (9) in receptacle (1).
Use soldering iron and solder (item 189,
App F) (TM 55-1500-323-24).
b. Install backshell (6) on receptacle J16 (1).
(1) Tighten backshell (6) on receptacle (1).
(2) Install two screws (7) through clamps (8) and
backshell (6).
GO TO NEXT PAGE
M04-1305-3
9
1
6
8
7
7
8