TM 1-1520-238-23
9-355
9.98.
ANTI-COLLISION LIGHT RED FLASHTUBE LAMP REPLACEMENT – continued
b. Remove red light assembly (6) from anti-colli-
sion light mounting plate (7).
(1) Remove three screws (8) and one lockwash-
er (9) from plate (7).
(2) Remove light (6).
c. Detach four terminals (10).
(1) Remove insulating sleeving (item 98, App F)
from four terminals (10).
(2) Identify and detach four terminals (10).
d. Remove flashtube lamp (11) from light (6).
(1) Remove two screws (12) and lockwashers
(13) from lens retainer (14).
(2) Remove screw (15) from insulator plate (16)
and retainer (14).
(3) Remove screw (17) from retainer (14).
(4) Remove plate (16), retainer (14), light lens
(18), gasket (19), and lamp (11) from lamp
mounting plate (20).
(5) Remove three screws (21) and standoffs (22)
from plate (20).
9.98.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
9.98.5. Inspection
a. Check removed and attaching parts for dam-
age (para 9.61).
b. Check wiring for cracked, broken, or burned
insulation (para 9.61).
GO TO NEXT PAGE
M04-4212-1
7
6
9
8
M04-4212-2
22
21
10
20
11
19
18
12
13
17
14
15
16
6
