TM 1-1520-238-23
9-354
9.98.
ANTI-COLLISION LIGHT RED FLASHTUBE LAMP REPLACEMENT
9.98.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
9.98.2. Initial Setup
Tools:
Electrical tool kit (item 378, App H)
Electric gun type heater (item 163, App H)
Ohmmeter (item 218, App H)
Materials/Parts:
Insulating sleeving (item 98, App F)
Personnel Required:
68X
Armament/Electrical System Repairer
68X3F
Armament/Electrical System Repairer/
Technical Inspector
References:
TM 55-1500-323-24
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
9.96
Anti-collision light DS8 or DS9 removed
CAUTION
Care must be taken when removing and
installing assembly with flashtube. Flash-
tube should not be handled and should
be protected when removing and instal-
ling assembly.
NOTE
This task is typical for left and right anti-
collision light flashtubes DS8 or DS9.
9.98.3. Removal
a. Remove light subassembly (1) from mounting
plate (2).
(1) Remove four nuts (3) and lockwashers (4).
(2) Remove four screws (5).
GO TO NEXT PAGE
M04-4212-5
2
1
5
3
4
