TM 1-1520-238-23
9-357
9.98.
ANTI-COLLISION LIGHT RED FLASHTUBE LAMP REPLACEMENT – continued
c. Install light (6) on plate (7).
(1) Position light (6) on plate (7).
(2) Install three screws (8) and one lockwasher
(9) through plate (7) into standoffs (23).
d. Install light (1) on plate (2).
(1) Install four screws (5) through light (1) and
plate (2).
(2) Install four lockwashers (4) and nuts (3) on
screws (5).
e. Inspect (QA).
f. Perform
electrical
bond
check
(TM 55-1500-323-24).
(1) Bond shall be 0.0025 OHM or less. Use
ohmmeter.
g. Inspect (QA).
h. Install anti-collision light DS8 or DS9 (para
9.96).
END OF TASK
M04-4212-4
7
6
9
8
23
M04-4212-6
2
1
5
34
