PILOT CAUTION/WARNING PANEL COIL L1 OR L2 REPLACEMENT (AVIM) continued

PILOT CAUTION/WARNING PANEL COIL L1 OR L2 REPLACEMENT (AVIM)

PILOT CAUTION/WARNING PANEL COIL L1 OR L2 REPLACEMENT (AVIM) continued - TM-1-1520-238-23-5_568

TM-1-1520-238-23-5 Helicopter Attack AH-64A Apache (NSN 1520-01-106-9519) (EIC: RHA) Manual
Page Navigation
550

TM 1-1520-238-23 9-414 9.113. PILOT CAUTION/WARNING PANEL COIL L1 OR L2 REPLACEMENT (AVIM) – continued 9.113.3. Removal WARNING Soldering iron can cause severe burns to personnel and start fires. Observe all safety precautions when using soldering iron. If injury occurs, seek medical aid. NOTE If replacing coil (A106)L2, perform step a. If replacing coil (A106)L1, perform step b. a. Remove coil (A106)L2 (1) from pilot caution/ warning panel housing (2). (1) Identify and desolder wires (3) from coil termi- nals (4). Use soldering iron (TM 55-1500-323-24). (2) Remove screw (5), washer (6), nut (7), and washer (8) and (9) from housing (2). (3) Remove coil (1). GO TO NEXT PAGE M04-4220-1 M04-4220-2 4 1 7 8 9 2 5 6 3

Privacy Statement
Press Release
Contact