TM 1-1520-238-23
9-508
9.135.
MASS TERMINATION CONNECTOR (MTC) (1 OR 2 INCH) REPAIR – continued
9.135.3. Removal
a. Detach connector (1) from connector (2).
(1) Loosen two captive jackscrews (3).
b. Remove two cable clamps (4) from connector
(1).
(1) Loosen two captive screws (5).
c. Remove two wafers (6) and (7) from connector
(1).
(1) Insert wafer removal tool (8) into rear of con-
nector (1) between connector (1) and wafer
(6) until tool (8) locks in place. Use Raychem
repair kit.
(2) Pull on tool (8) and wires connected to wafer
(6) until wafer (6) is free.
(3) Pull wafer (7) out of connector (1).
GO TO NEXT PAGE
2
1
3
M04-3065-1
3
4
5
5
4
1
M04-3065-2
8
7
6
M04-3065-3
1
M04-3065-4
8
6
1
7
