TM 1-1520-238-23
11-120
Change 2
11.19.
TORQUE LINK REMOVAL/INSTALLATION – continued
c. Remove link (1) from swashplate (18).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (19).
(3) Hold and support link (1).
(4) Hold nut (20). Use open end wrench.
(5) Remove bolt (21), washer(s) (22) (if re-
quired), bushing (23), and nut (20) from
swashplate (18) and link (1). Use open end
wrench.
11.19.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.19.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
21
22
23
18
1
20
19
M04-1717-4
