TM 1-1520-238-23
11-124
11.20.
PILOT OR CPG COLLECTIVE STICK REMOVAL
11.20.1. Description
This task covers:
Removal. Cleaning. Inspection.
11.20.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Personnel Required:
67R
Attack Helicopter Repairer
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
11.44
Collective stick cover removed
NOTE
This task is typical for pilot and CPG col-
lective stick except as noted.
11.20.3. Removal
a. Enter pilot or CPG station (para 1.56). Observe
all safety precautions.
NOTE
Hydraulic power may be required to re-
position stick for ease of removal.
b. Detach connector P1 (pilot)/P1 (CPG) (1) from
receptacle J993 (pilot)/J994 (CPG) (2) and
connector P107 (pilot)/P108 (CPG) (3) from re-
ceptacle J107 (pilot)/J108 (CPG) (4).
c. Remove guide (5) from collective stick (6).
(1) Remove and discard cotter pin (7).
(2) Remove nut (8).
(3) Remove flat washers (9) (if necessary), flat
washer (10), spring (11), retainer (12), con-
cave washer (13), shouldered washer (14),
and flat washer (15).
GO TO NEXT PAGE
M04-1732-1
13
12
11
9
10
8
6
7
15
14
M04-1732-2
2
4
3
5
1
TYPICAL 2 PLACES
