TM 1-1520-238-23
Change 2
11-119
11.19.
TORQUE LINK REMOVAL/INSTALLATION – continued
11.19.3. Removal
CAUTION
To prevent damage to self-retaining bolt,
press retention device lock fully when re-
moving bolt.
a. Remove torque link (1) from right side of aft
longitudinal bellcrank (2).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (3).
(3) Hold bolt (4) and loosen nut (5). Use open
end wrench and socket.
(4) Press retaining device (6) on bolt (4). Re-
move nut (5) and washer (7).
(5) Remove bolt (4), washer(s) (8) (if required),
and spacer (9).
CAUTION
To prevent damage to self-retaining bolt,
press retention device lock fully when re-
moving bolt.
b. Remove link (1) from left side of bellcrank
(10).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (11).
(3) Hold bolt (12). Loosen nut (13). Use open end
wrench and socket.
(4) Press retaining device (14) on bolt (12).
(5) Remove nut (13) and washer (15).
(6) Remove bolt (12), washer(s) (16) (if re-
quired), and spacer (17).
GO TO NEXT PAGE
M04-1717-1
1
9
8
4
2
M04-1717-2
7
3
5
6
10
12
14
16
17
15
11
13
1
M04-1717-3
