TM 1-1520-238-23
11-138
11.24.
COLLECTIVE STICK GRIP ASSEMBLY REMOVAL/INSTALLATION – continued
b. Detach connector P107 (pilot)/P108 (CPG) (1)
from receptacle J107 (pilot)/J108 (CPG) (2).
c. Depin wire bundles (3) and (4) from connector
(1).
(1) Remove backshell (5) from connector (1).
(2) Cut and remove all tape (6) from wire bundles
(3) and (4).
(3) Identify and depin all wires (7) in wire bundles
(3)
and
(4)
from
connector
(1)
(TM 55-1500-323-24).
(4) Slide backshell (5) off wire bundles (3) and
(4).
(5) Retain backshell (5) and connector (1).
d. Remove grip assembly (8) and wire bundles
(3) and (4) from collective stick assembly (9).
(1) Remove bolt (10).
(2) While pulling grip (8), feed wire bundles (3)
and (4) into tube (11) of stick (9).
(3) Remove grip (8) and wire bundles (3) and (4).
GO TO NEXT PAGE
M04-3748-1
7
6
6
5
3
1
4
2
11
M04-3748-2
8
10
4
9
3
4
