TM 1-1520-238-23
11-142
11.25.
COLLECTIVE STICK GRIP CONTROL COLLAR REPLACEMENT continued
11.25.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.25.5. Inspection
a. Check removed and attaching parts for
cracks. None allowed.
b. Check removed and attaching parts for dam-
age. None allowed.
c. Check removed and attaching parts for corro-
sion (para 1.49).
d. Check switch and bracket assembly detent
area where the straight pin from the grip con-
trol collar interfaces.
(1) Maximum allowable gouging in detent area is
0.010 INCH deep and 0.035 INCH wide.
11.25.6. Installation
a. Install collar (1) on grip (2).
(1) Install spring (6), washer (5), and spring (4).
(2) Slide collar (1) over wire bundles (7) and (8).
(3) Aline collar (1) on straight pin (3) and install.
b. Inspect (QA).
c. Install collective stick switch and bracket as-
sembly (para 11.34).
d. Install collective stick grip assembly (para
11.24).
END OF TASK
M04-3749-2
3
2
4
1
5
6
8
7