TM 1-1520-238-23
11-156
11.29.
COLLECTIVE STICK STORES JETTISON SWITCH REPLACEMENT continued
11.29.6. Installation
a. Install switch (10) on mounting plate (8).
(1) Apply a small bead of adhesive to base of
switch (10). Use adhesive (item 14, App F).
(2) Press switch (10) in mounting plate (8).
(3) Allow adhesive to cure.
WARNING
Soldering iron can cause severe
burns to personnel and start fires.
Observe all safety precautions when
using soldering iron. If injury occurs,
seek medical aid.
b. Solder wires (11) to switch (10).
(1) Solder identified wires (11) to switch (10).
Use soldering iron and solder (item 189,
App F) (TM 55-1500-323-24).
c. Apply a thin coat of adhesive over terminals
and bare wires. Use adhesive (item 14, App F).
d. Inspect (QA).
e. Install switch mounting plate (8) on collective
grip (6).
(1) Install plate (8) on grip (6).
(2) Install three screws (9).
GO TO NEXT PAGE
M04-3514-6
8
10
11
6
VIEW
ROTATED
M04-3514-4
9
8
6