TM 1-1520-238-23
11-181
11.35.
COLLECTIVE STICK TUBE ASSEMBLY DISASSEMBLY/ASSEMBLY (AVIM) – continued
11.35.7. Assembly
a. Install housing (5) on tube (2).
(1) Slide housing (5) on tube (2) and aline.
(2) Install three new rivets (14) in housing (5)
(TM 1-1500-204-23).
(3) Install gear (13), three washers (12), and re-
taining ring (11) on housing (5).
(4) Check axial clearance of gear (13).
(a) Add or remove washers (12) to maintain
axial clearance of 0.005 INCH to 0.010
INCH.
(5) Install shaft (10), washer (9), and gear (8) on
housing (5).
(6) Install cover (7) and three screws (6) on
housing (5).
b. Install handle (4) on tube (2).
(1) Slide handle (4) on tube (2).
(2) Install handle (4) in housing (5).
(a) Aline lockwire hole in handle (4) with
lockwire hole in housing (5).
c. Install retainer (1) on tube (2).
(1) Slide retainer (1) on tube (2) and aline.
(2) Install two new rivets (3) in retainer (1)
(TM 1-1500-204-23).
d. Inspect (QA).
END OF TASK
5
2
14
7
9
8
13
11
12
10
M04-4281-3
6
1
4
5
2
3
M04-4281-4
