TM 1-1520-238-23
11-256
Change 3
11.54.
PILOT CYCLIC STICK HOUSING REMOVAL – continued
f. Remove push-pull rod (20) from arm (21).
(1) Remove and discard cotter pin (22).
(2) Remove nut (23).
(3) Remove bolt (24), washer (25), and bushing
(26).
(4) Remove rod (20).
g. Remove longitudinal transducer shaft (27)
from arm (28).
(1) Measure distance A between end of shaft
(27) and edge of arm (28). Record measure-
ment for installation.
(2) Remove lockwire.
(3) Loosen nut (29).
(4) Rotate shaft (27) counterclockwise until free
of rod end (30).
(5) Remove nut (29) and keywasher (31) from
rod end (30).
h. Remove longitudinal feel spring cartridge (32)
from arm (33).
(1) Remove and discard cotter pin (34).
(2) Remove nut (35).
(3) Remove bolt (36) and bushing (37).
(4) Remove cartridge (32).
i. Remove longitudinal push-pull rod (38) from
arm (39).
(1) Remove and discard cotter pin (40).
(2) Remove nut (41).
(3) Remove bolt (42), washer (43), and bushing
(44).
(4) Remove rod (38).
GO TO NEXT PAGE
20
22
23
26
25
24
21
M04-1704-6
M04-1704-7B
28
A
30
2931
29
27
30
31
32
36
37
34
35
M04-1704-8A
33
M04-1704-9A
39
41
40
44
43
42
38
