TM 1-1520-238-23
Change 3
11-259
11.55.
PILOT CYCLIC STICK HOUSING INSTALLATION – continued
11.55.3. Installation
a. Install housing (1) on floor (2).
(1) Position housing (1) on floor (2).
(2) Install four bolts (3) and washers (4).
b. Install longitudinal transducer shaft (5) on
arm (6). Use measurement A recorded during
removal.
(1) Install nut (7) and keywasher (8) on rod end
(9).
(2) Engage threads and rotate shaft (5) clock-
wise until required measurement A has been
obtained.
(3) Tighten nut (7).
(4) Lockwire nut (7) to keywasher (8). Use wire
(item 226, App F).
GO TO NEXT PAGE
1
M04-1705-2
3
4
2
M04-1705-3B
8
6
97
5
A
