TM 1-1520-238-23
11-807
11.182.
MOTIONAL TRANSDUCER REMOVAL/INSTALLATION – continued
CAUTION
Exercise care when rotating swashplate
to ensure that the transducer does not
strike the interrupters. If transducer con-
tacts interrupters, equipment damage will
occur.
d. Adjust transducer (3) so that gap of 0.030 to
0.070 INCH exists between transducer (3) and
four interrupters (1).
e. Torque locknut (7) to 110 INCH-POUNDS. Use
crowfoot and torque wrench.
f. Attach connector P57 (4) to transducer MT32
(3).
g. Lockwire locknut (6) to locknut (7) and con-
nector P57 (4). Use wire (item 224, App F).
h. Inspect (QA).
i. Secure access doors T250L, T250R, T290L,
T290R, and L325 (para 2.2).
j. Perform main rotor track and balance mainte-
nance operational check (TM 1-1520-238-T).
END OF TASK
0.030 TO 0.070
3
6
1
7
M04-3349-4
3
4
6
7
M04-3349-5
