TM 1-1520-238-23
11-869
11.198.
CPG LATERAL CONTROL POSITION LINEAR VARIABLE DIFFERENTIAL TRANSDUCER (LVDT)
REMOVAL – continued
c. Detach connector P237 (1) from receptacle
J237 (2).
d. Remove clamps (3), (4), and (5) from LVDT
wire harness (6).
(1) Remove nut (7) from screw (8).
(2) Remove screw (8) and washer (9) from clamp
(3).
(3) Remove nut (10) from screw (11).
(4) Remove screw (11) and washer (12) from
clamp (4).
(5) Remove screw (14), washer (15), and spacer
(16) from clamp (5).
(6) Remove clamps (3), (4), and (5).
e. Remove connector (1) from wire harness (6), if
required (TM 55-1500-323-24).
NOTE
On BUCS-equipped aircraft, an electrical
lead will be attached to LVDT.
f. Remove electrical lead (17) from ground stud
(18).
(1) Remove nut (19) and washer (20).
(2) Remove lead (17) from stud (18).
g. Remove clamp (21) from LVDT (22).
(1) Remove nut (24) and washer (25).
(2) Remove bolt (23), washer (25), lead (17), and
washer (26).
(3) Remove clamp (21) from LVDT (22).
GO TO NEXT PAGE
8
9
11
12
5
15
14
7
4
10
16
1
6
3
2
M04-1853-6
M04-1853-5
18
19
17
20
26
17
24
21
25
22
25
23
