TM 1-1520-238-23
11-873
11.199.
CPG LATERAL CONTROL POSITION LINEAR VARIABLE DIFFERENTIAL TRANSDUCER (LVDT)
INSTALLATION – continued
d. Install LVDT (2) on bracket (13). Torque nut (14)
14 to 18 INCH-POUNDS.
(1) Aline LVDT (2) with bracket (13).
(2) Install bolt (15) through washer (16), bracket
(13), and bearing (17).
(3) Check fit of self-retaining bolt (15) (para
11.1).
(4) Install nut (14). Torque nut (14) to 14 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 18 INCH-POUNDS.
(6) Install new cotter pin (18).
e. Install CPG cyclic stick -5 rig pin (para 11.289).
f. Attach connector P237 (8) to receptacle J237
(19).
g. Install clamp (20) on wire harness (9).
(1) Install screw (21) through washer (22) into
clamp (20).
(2) Install nut (23) on screw (21).
h. Install clamp (24) on wire harness (9).
(1) Install screw (25) through washer (26) into
clamp (24).
(2) Install nut (27) on screw (25).
GO TO NEXT PAGE
13
14
M04-1854-4
15
2
16
18
17
21
22
25
26
23
24
27
8
9
20
19
M04-1854-5
