TM 1-1520-238-23
Change 8
16-27
16.5.
PYLON RACK DISASSEMBLY/ASSEMBLY (AVIM) - continued
e. Install temporary cotter pin (24) through hole
at end of rod (25) to retain springs (26) and
(27) and spacer (28) on aft hook assembly (29)
during removal.
(1) Compress springs (26) and (27) until cotter
pin hole in rod (25) is visible.
(2) Insert pin (24) through hole in rod (25).
f. Remove forward hook assembly (22), link (30),
and Aft hook assembly (29) from mounting
bracket (6).
(1) Grasp Forward hook assembly (22) with left
hand and Aft hook assembly (29) with right
hand. Slowly work both assemblies loose
from mounting bracket (6) with link (30) still
attached.
g. Remove link (30) from assemblies (22) and
(29).
(1) Remove and discard two cotter pins (31).
(2) Remove two washers (32) and two pins (33).
GO TO NEXT PAGE
M04-2704-75
26
27
28
24
ROTATED FOR
CLARITY
29
25
M04-2704-50A
6
31
32
33
30
30
31
33
29
22
