TM 1-1520-238-23
Change 8
16-37
16.5.
PYLON RACK DISASSEMBLY/ASSEMBLY (AVIM) - continued
i. Install two bumpers (16) in mounting bracket
(6).
j. Join mounting brackets (5) and (6) of rack (4).
(1) Apply grease sparingly to attach points on
assemblies (22) and (29), and mounting
bracket (5). Use grease (item 86, App F).
(2) Aline dowel pins (65), bumpers (16) and as-
semblies (22) and (29) with mounting bracket
(5) attach points.
(3) Press two mounting bracket halves (5) and
(6) together. Tap gently until seated.
NOTE
Unless otherwise stated all bolt instal-
lations in the following steps will be
installed from the left half of pylon
rack.
Applied primer must be wet when bolts
are installed.
k. Secure mounting bracket halves (5) and (6) of
rack (4).
(1) Apply primer to bolts (9) and (11). Use epoxy
primer
coating
kit
(item 78,
App F)
(TM 55-1500-345-23).
(2) Install six bolts (9) with washers (8) through
rack (4).
(3) Install six washers (8) and nuts (7) on bolts
(9).
(4) Install bolt (11) (with safety wire holes) with
washer (10) through rack (4).
(5) Install washer (10) and nut (7) on bolt (11).
GO TO NEXT PAGE
M04-2704-69
65
16
16
65
5
29
6
22
8
ROTATED
FOR CLARITY
9
M04-2704-70A
9
7
8
11
8
7
8
8
8
9
8
9
7
7
7
8
8
8
10
7
10
4
8
