TM 1-1520-238-23
16-70
Change 8
16.14.
PYLON AERIAL BRACKET REMOVAL/INSTALLATION - continued
e. Install connector P510 (2) on bracket (4).
(1) Install ring (7) on connector P510 (2) with ring
lugs (22) pointing up. Use retaining ring
pliers.
(2) Aline keyway (23) of connector P510 (2) with
keyway (24) on bracket (4).
(3) Insert connector P510 (2) on bracket (4) until
ring (7) is against bracket (4).
(4) Install spring (1), washer (6), and retaining
ring (5) on connector P510 (2). Use retaining
ring pliers.
(5) Remove lockwire from spring (1).
f. Install connector P525 (3) on bracket (4).
(1) Install ring (7) on connector P525 (3) with ring
lugs (22) pointing up. Use retaining ring
pliers.
(2) Aline keyway (25) of connector P525 (3) with
keyway (26) on bracket (4).
(3) Insert connector P525 (3) on bracket (4) until
ring (7) is against bracket (4).
(4) Install spring (1), washer (6), and retaining
ring (5) on connector P525 (3). Use retaining
ring pliers.
(5) Remove lockwire from spring (1).
g. Inspect (QA).
h. Install station director (TM 9-1090-208-23-1).
i. Install pylon fairings P1, P2, and P3 (para 2.2).
END OF TASK
5
6
1
4
23
24
26
3
M04-2712-10A
2
25
22
7
