TM 1-1520-238-23
16-74
Change 8
16.15.
PYLON CONTROLLER AND CONTROLLER BRACKET REMOVAL/INSTALLATION - continued
b. Install bracket (2) on frame (4).
(1) Aline holes in bracket (2) with holes in frame
(4).
(2) Install cap screws (7) with washers (6)
through bracket (2) on frame (4).
(3) Install cap screws (5) with washers (6)
through bracket (2) on frame (4).
c. Install controller (1) in bracket (2).
(1) Position controller (1) on bracket (2). Ensure
electrical receptacle on controller (1) is prop-
erly alined with electrical connector (8) on
bracket (2).
(2) Lock two captive fasteners (3).
d. Inspect (QA).
e. Perform external stores system maintenance
operational check (TM 9-1090-208-23-2).
f. Install pylon fairing P3 (para 2.2).
g. Install pylon rack ejector impulse cartridge
(para 16.3).
END OF TASK
M04-2762-6
6
5
6
7
2
4
M04-2762-9
8
1
2
3
