TM 1-1520-238-T-7
11376
Change 5
1191. STAB MAN DC CIRCUIT BREAKER DOES NOT STAY CLOSED
1191
Tools:
Nomenclature
Part Number
Tool Kit, Electrical
SC518099CLA06
Repairers
Multimeter, Digital
AN/PSM-45
Extractor, Relay
CTJ-RO6
Personnel Required:
68X
Armament/Electrical Systems Repairer
References:
TM 1-1520-238-T-6
TM 1-1520-238-23
WARNING
Turn off power before detaching or
attaching wires and connectors. High
current 28 VDC or 115 VAC is present.
Failure to do so could result in death or
serious injury.
1. Does STAB MAN DC circuit breaker (A76)CB6
open only when PLT NU/ND switch is pressed to
NU or ND.
YES
Go to step 11.
NO
Go to step 2.
2. Open STAB MAN DC (A76)CB6, STAB AUTO
DC (A76)CB3, STAB AUTO AC (A76)CB2, and
ENG WARN (A76)CB52 circuit breakers. Detach
P2 from (A402)J2. Check for short between
P2g and ground.
Does short exist?
YES
Refer to TM 1-1520-238-T-6
to troubleshoot circuit protection
system (ac essential bus 1
pilot station).
NO
Go to step 3.
3. Detach P427 from (A402)J28.
Check for short between (A402)J2g and
ground.
Does short exist?
YES
Go to step 4.
NO
Go to step 8.
4. Detach P437 from (A402)J25.
Check for short between (A402)J2g and
ground.
Does short exist?
YES
Repair shorted wire between
(A402):
J2g and TB223A,
J25A and TB223D,
J25D and TB223F,
TB223E and TB224A,
TB224D and J28E,
TB224E and J28F,
TB224B and J28A,
TB224C and J28B.
Go to paragraph 1188.
NO
Go to step 5.
5. Check for short between P437D and ground.
Does short exist?
YES
Go to step 6.
NO
Go to step 7.
6. Detach J994 from (A641)P1.
Check for short between P437D and ground.
Does short exist?
YES
Repair shorted wire between
P437D and J994B.
Go to paragraph 1188.
NO
Replace CPG MAN STAB
CONT SW (A641)
(TM 1-1520-238-23).
7. Detach J993 from (A641)P1.
Check for short between P437A and ground.
Does short exist?
YES
Repair shorted wire between
P437A and J993B.
Go to paragraph 1188.
NO
Replace pilot MAN STAB CONT
SW (A641)
(TM 1-1520-238-23).
8. Check for short between:
P427E and ground,
P427F and ground.
Does short exist?
YES
Go to step 9.
NO
Go to step 10.