TM 1-1520-238-T-7
Change 5
11–388.1
11–100. PILOT AND/OR CPG STAB POS INDICATORS – DO NOT INDICATE FULL NOSE UP
11–100
POS (9 2), FULL DOWN (35 2), OR OFF FLAG APPEARS (cont)
4. Attach P441 to (A402)J24. Detach P413 from
(A326)J10.
Check for 26 VAC between P413–B10 and
P413–B11.
Is voltage present?
YES
Go to step 5.
NO
Repair open wire between:
P413–B10 and P441–B19,
P413–B11 and P441–B20.
Go to paragraph 11–88.
5. Attach P413 to (A326)J10. Detach P981 from
(M51)J1.
Check for 26 VAC between P981–D and
P981–E.
Is voltage present?
YES
Go to step 6.
NO
Repair open wire between:
P981–D and P413–B17,
(A326)J10–B17 and
(A326)TB1–17–T,
(A326)TB1–17–Y and
(A326)J10–B10,
P981–E and P413–B18,
(A326)J10–B18 and
(A326)TB1–17–R,
(A326)TB1–17–R and
(A326)J10–B11.
Go to paragraph 11–88.
6. Detach P982 from (M52)J1.
Check for 26 VAC between J1076–E and
J1076–F.
Is voltage present?
YES
Go to step 7.
NO
Repair open wire between:
P982–D and P472–A8,
(A326)J15–A8 and
(A326)TB1–17–W,
J1076–F and P431–A17,
(A402)J27–A17 and
(A402)TB3–17–Y.
Go to paragraph 11–88.
7. Detach (MT19)P1076 from J1076.
Check for 26 VAC between J1076–E and
J1076–F.
Is voltage present?
YES
Go to step 8.
NO
Repair open wire between:
P1076–E and P431–A16,
(A402)J27–A16 and
(A402)TB3–17–R ,
P1076–F and P431–A17,
P431–A17 and
(A4023)TB3–17–Y.
Go to paragraph 11–88.
