TM 1-1520-238-23
Change 8
2-413
2.113.
HORIZONTAL STABILATOR REMOVAL/INSTALLATION – continued
c. Install two plates (27) inside stabilator (2).
(1) Position two plates (27) over bolts (32).
(2) Install two screws (28) and washers (29) in
each plate (27).
d. Install transducer (8) in stabilator.
(1) Install two screws (20) and washers (21)
through bracket (22), shim (23), and stabila-
tor (2). Use offset screwdriver.
(2) Install screw (17) and washer (18) in clamp
(19).
(3) Attach receptacle J1076 (15) to connector
P1076 (16).
(4) Install tie strap (14). Use strap (item 192,
App F).
(5) Install screw (9) through washer (10), clamps
(11) and (12), and spacer (13).
e. Remove rig pin (24) from rig pin holes (25) and
(26).
GO TO NEXT PAGE
32
2
M04-2028-6
27
28
29
9
11
12
10
16
M04-2028-14
17
18
13
21
20
19
22
23
15
14
8
2
26
M04-2028-11
24
25
